Electrical & Lighting

 
1 - 91 of 91 items
Copper Core 8.8MM Spark Plug Wire Set Braided Spark Plug Wires for 65-85 XL
Copper Core 8.8MM Spark Plug Wire SetBraided Spark Plug Wires for 65-85 XL
Constructed with silicone throughout the jacket to deliver high-temperature resistance Rated at SAE Class E J2031 with a continuous operating temperature of 450°F Copper core wires should be used on bikes with magneto- or points-style ignitions Made in the U.S.A.The industry’s best braid is available in Sterling Chromite®, Polished Stainless, metallic red and metallic blue Braid perfectly matches all other Magnum cables and brake lines High-voltage, high temperature 8mm silicone ignition wire...

$20.95

$60.95

Chrome Ignition Module Cover for 82-85 XL Chrome Coil Cover for 83-85 XL
Chrome Ignition Module Cover for 82-85 XLChrome Coil Cover for 83-85 XL
  • Smooth stamped steel construction
  • Sold each

Covers OEM and most aftermarket OEM-style coils in highly visible stock locations Mounts with OEM hardware Includes cover for the top and back side of coil on XL model Not for fuel-injected models or 1200S

$15.95

$27.95

Ignition and Coil Kits for 71-85 XL Ignition Sensor Assembly for 80-85 XL
Ignition and Coil Kits for 71-85 XLIgnition Sensor Assembly for 80-85 XL

Complete electronic ignition systems built with the latest state-of-the-art engineering The same ignition used by top drag and road racers to set records and bring home victories over the past decade The Dyna S is completely housed behind the...

Includes a pickup, mounting plate and wires with connectors

$209.99

$52.95

Ignition Booster Module- Single Points Ignition Advance Unit Assembly for 71-85 XL (except single fire ignition)
Ignition Booster Module- Single Points IgnitionAdvance Unit Assembly for 71-85 XL (except single fire ignition)

Boost ignition power in points-equipped motorcycle Improves performance by transferring inconsistent electrical surges into precisely controlled bursts of energy to the coil for more thorough and efficient combustion No more burned points;...

Includes all the items shown

$153.95

$42.95

Replacement Timing Bolt for 71-85 XL Tune Up Kits
Replacement Timing Bolt for 71-85 XLTune Up Kits

Replacement mechanical advance unit timing bolt

Contact sets include a metal spring to reduce metal fatigue and long-life follower Sealed condenser helps prevent water damage Meets or exceeds OEM specs

$1.95

$12.95

Circuit Breaker Post Rebuild Kit for 57-69 XL High Torque Starters for 67-80 XL
Circuit Breaker Post Rebuild Kit for 57-69 XLHigh Torque Starters for 67-80 XL
Reproduction of brass circuit breaker post Kit includes one post and one installation tool Made in the U.S.A.

For 67-80 XL equipped with prestolite starters (6" Long); Repl. OEM #31458-66 Starters feature 15% more power and torque than OEM units Manufactured using heavy-duty armature commutators, large drive-end bearings and needle bearings in the com-end caps

$10.95

$174.95

High Torque Starters for 74-E76 XLH High-Performance Starter Motors for 67-80 XL- Prestolite
High Torque Starters for 74-E76 XLH High-Performance Starter Motors for 67-80 XL- Prestolite
For 74-E76 XLH equipped with Hitachi Starters (5-1/4" Long); Repl. OEM #31570-73 Starters feature 15% more power and torque than OEM units Manufactured using heavy-duty armature commutators, large drive-end bearings and needle bearings in the com-end caps

100% new - not remanufactured! Starters feature oversize clutch rollers, cold headed steel idler gears and armature hairpins that are resistance-fused to the armature 1.4kW is a new replacement unit for stock and slightly modified engines;...

$174.95

$285.95

High-Performance Starter Motors for 81-85 XL High-Performance Starter Motors for 74-E76 XLH- Hitachi
High-Performance Starter Motors for 81-85 XLHigh-Performance Starter Motors for 74-E76 XLH- Hitachi

100% new - not remanufactured! Special pinion shaft threads and extended jackshaft bolt allow for a wider range of applications Starters feature oversize clutch rollers, cold headed steel idler gears and armature hairpins that are...

100% new - not remanufactured! Starters feature oversize clutch rollers, cold headed steel idler gears and armature hairpins that are resistance-fused to the armature 1.4kW is a new replacement unit for stock and slightly modified engines;...

$355.95

$285.95

Starter Gear Engagement Lever for 67-80 XL, XLH Starter End Bearing for 67-80 XL
Starter Gear Engagement Lever for 67-80 XL, XLHStarter End Bearing for 67-80 XL

Replaces OEM-style engagement lever

  • High-quality OEM replacement component
  • Sold each

$8.95

$12.95

Starter Brushes Starter Shaft Housing Bearing for 67-80 XL
Starter BrushesStarter Shaft Housing Bearing for 67-80 XL
  • Replacement brushes for early and late model starters
  • Made in the U.S.A.

Needle bearing fits starter housings as listed below

$15.95

$13.95

Starter Drive for 67-80 XL Starter Drive Clutch for 81-85 XL
Starter Drive for 67-80 XLStarter Drive Clutch for 81-85 XL
  • Heavy-duty, weatherproof, five-roller clutch
  • Sold each

Comes complete with bearing and drive clutch Direct OEM replacement Sold each Made in the U.S.A.

$37.95

$117.95

Heavy-Duty Starter Drive Clutch for 67-80 XL Starter Shaft Outer Thrust Washers for 67-80 XL
Heavy-Duty Starter Drive Clutch for 67-80 XLStarter Shaft Outer Thrust Washers for 67-80 XL
  • Comes complete with bearing and drive clutch
  • Direct OEM replacement
  • Replaces OEM #31502-65
  • Sold in pairs

$84.95

$9.95

Starter Ring Gear for 67-79 XL Starter Thru Bolts for 74-E76 XL
Starter Ring Gear for 67-79 XLStarter Thru Bolts for 74-E76 XL
  • Replacement 62-tooth weld-on style
  • 61/2" i.d.
  • Sold each
  • Fit Hitachi starters only
  • 6-7/16" long
  • Sold in pairs

$47.95

$14.95

Starter End Cover for 67-80 XL Solenoid End Cover for 67-80 XL
Starter End Cover for 67-80 XLSolenoid End Cover for 67-80 XL
Chrome, die-cast starter end cover adds a finishing touch to custom or fully-dressed Panhead models Smooth finish

Beautifully chromed cover features die-cast construction Fits over the starter solenoid rubber boot U.S. Des. Pat. #283,210.

$13.95

$18.95

Rubber Solenoid Boot for 67-80 XL High-Performance Starter Solenoid for 67-80 XL
Rubber Solenoid Boot for 67-80 XLHigh-Performance Starter Solenoid for 67-80 XL
A molded black rubber boot for 4- and 5-speed starter solenoids We recommend replacing the OEM boot when installing our chrome solenoid end cover

Designed with extra current capacity for starting high-compression motors Recommended for use with Drag Specialties High Performance Starters Features zinc-plated case Copper terminals and hardened plunger Sealed cover for long life

$5.95

$57.95

Starter Relay Switches Solenoid End Cover/Starter Buttons
Starter Relay SwitchesSolenoid End Cover/Starter Buttons

Easily handles high-current draw

Beautiful T-6 billet aluminum replaces the OEM end cover Can be used as primary or auxiliary starter button Available in triple-plated show chrome or wrinkle black powdercoat finish Install in just minutes with OEM hardware For use with 81-85 OEM...

$15.95

$79.95

Starter Relay for 67-74 XL Relay Socket Assemblies for 57-85 XL
Starter Relay for 67-74 XLRelay Socket Assemblies for 57-85 XL
  • High-quality OEM replacement component
  • Includes a black cover

Used for starter relay and other relays on later model bikes Available with black wires or colored wires (red, green, blue, yellow and orange)

$39.95

$6.95

The "Great" Generator for 65-81 XL that us OEM #29975-65A Generator Post Kit for 58-78 XL
The "Great" Generator for 65-81 XL that us OEM #29975-65AGenerator Post Kit for 58-78 XL

Replacement 10A, 12V generator Features a balanced armature, precision-ground, heat-treated armature shaft, die-cast and machined-aluminum end cover and end plate Brush end contains sealed roller bearing, while the drive end has a shielded ball...

Kit includes two screws; OEM #2690W, two insulating bushings; OEM #5911, two fiber washers; OEM #6186, two lock washers; OEM #7220 and two nuts; OEM #7634 Made in the U.S.A.

$239.95

$17.95

Generator Drive Gear Washers for 58-81 XL Generator Relay for 54-57 XL
Generator Drive Gear Washers for 58-81 XLGenerator Relay for 54-57 XL
  • Sold in 5-packs
  • Made in the U.S.A.
  • 6-volt design
  • Includes a chrome cover

$3.40

$56.95

Generator Strap for 58-81 XL Generator End Cover for 57-81 XL
Generator Strap for 58-81 XLGenerator End Cover for 57-81 XL
  • Black finish
  • Sold each
  • Made in the U.S.A.

Features die-cast construction with a smooth chrome finish

$10.95

$14.95

Generator Cover for 57-81 XL Alternator Stator for L84-85 XL
Generator Cover for 57-81 XLAlternator Stator for L84-85 XL

Chromed to add a custom look to any generator

Meets or exceeds OEM specifications and features precise construction

$24.95

$64.95

Solid State Regulators for 78-81 XL/XLCH; 77-78 XLCR Solid State Regulators for 82-E84 XL w/generator
Solid State Regulators for 78-81 XL/XLCH; 77-78 XLCRSolid State Regulators for 82-E84 XL w/generator
High-reliability voltage regulators feature rugged aluminum alloy construction and are available in Drag's chrome finish All provide accurately regulated voltage under all electrical loads, have no relay contacts to wear or become maladjusted and...High-reliability voltage regulators feature rugged aluminum alloy construction and are available in Drag's chrome finish All provide accurately regulated voltage under all electrical loads, have no relay contacts to wear or become maladjusted and...

$53.95

$53.95

Solid State Regulators for L84-85 XL Solid State Regulators for 58-64 XL
Solid State Regulators for L84-85 XLSolid State Regulators for 58-64 XL

High-reliability voltage regulators feature rugged aluminum alloy construction and are available in Drag's chrome finish All provide accurately regulated voltage under all electrical loads, have no relay contacts to wear or become maladjusted and...

High-reliability voltage regulators feature rugged aluminum alloy construction and are available in Drag's chrome finish All provide accurately regulated voltage under all electrical loads, have no relay contacts to wear or become maladjusted and...

$59.95

$63.95

12V Regulator for 67-78 XLH Voltage Regulator Mounting Kit for 67-77 XL
12V Regulator for 67-78 XLHVoltage Regulator Mounting Kit for 67-77 XL

Vibration-resistant internal wire connections, fiber and Mylar® insulating pads and large-diameter contact surfaces Made in the U.S.A.

  • Kit includes three rubber insulators with nuts and lock washers
  • Made in the U.S.A.

$84.95

$7.95

Battery Terminal Kit for 54-66 XL Battery Strap for 70-78 FX; 70-78 XLCH
Battery Terminal Kit for 54-66 XLBattery Strap for 70-78 FX; 70-78 XLCH

Add a look of authenticity with these reproduced battery terminal fasteners and felt washers Fits 6V systems Made in the U.S.A.

High-quality replacement battery straps are manufactured from 18-gauge stainless steel Meet or exceed OEM specifications

$15.95

$13.95

Battery Strap for 77-78 XLCR; 79 XL (rubber) Battery Strap for 82-85 XL
Battery Strap for 77-78 XLCR; 79 XL (rubber)Battery Strap for 82-85 XL

  • Meet or exceed OEM specifications
High-quality replacement battery straps are manufactured from 18-gauge stainless steel Meet or exceed OEM specifications

$6.95

$13.95

Battery Cover for 91-96 FXD, 85 FXE, 82-99 XL Battery Cover for 73-84 FXE, 80-84 FXWG; 82-85 XL
Battery Cover for 91-96 FXD, 85 FXE, 82-99 XLBattery Cover for 73-84 FXE, 80-84 FXWG; 82-85 XL
For 91-96 FXD, 85 FXE, 82-99 XL; repl. OEM #66347-91, raised panel (viewing window) Feature precise formed covers for sealed and conventional batteries NOTE: The use of AGM sealed maintenance-free batteries requires battery side covers designed for the AGM battery.

Feature precise formed chrome covers for sealed and conventional batteries

$29.95

$18.95

Battery Cover for 71-78 FX; 70-78 XLCH Battery Cover for 80-81 XL
Battery Cover for 71-78 FX; 70-78 XLCHBattery Cover for 80-81 XL

Feature precise formed chrome covers for sealed and conventional batteries

Feature precise formed covers for sealed and conventional batteries

$18.95

$18.95

Battery Cover for 67-78 XLH Battery Top Cover for 85 FXE, 85-86 FXWG, 86-96 XL
Battery Cover for 67-78 XLHBattery Top Cover for 85 FXE, 85-86 FXWG, 86-96 XL

Feature precise formed covers for sealed and conventional batteries

For 85 FXE, 85-86 FXWG, 86-96 XL; repl. OEM #66367-73

Chromed replacement battery top covers fit precisely and feature vibration-absorbing cushions

$22.95

$15.95

Battery Top Cover for 71-78 FX; 70-78 XLCH Battery Top Cover for 67-78 XLH
Battery Top Cover for 71-78 FX; 70-78 XLCHBattery Top Cover for 67-78 XLH

Chromed replacement battery top covers fit precisely and feature vibration-absorbing cushions

Chromed replacement battery top covers fit precisely and feature vibration-absorbing cushions

$14.95

$23.95

Dual Electric Horns Custom Round Key Ignition Switch for 79-85 XL
Dual Electric Horns Custom Round Key Ignition Switch for 79-85 XL

Chromed dual horns with a relay Produce sound levels comparable to those of a semi's horn (approximately 107 dB) 12V horn fits all motorcycles and comes with mounting hardware Sold as a set

Round key design with three-position activation: off, ignition only, or ignition and lights

$45.95

$31.95

Ignition Switch Mount Chrome Horns
Ignition Switch Mount Chrome Horns

Chrome-plated ignition switch mount Features a 7/8" hole that accepts most ignition switches Mounts almost anywhere using a 5/16" mounting hole

12V horns emit loud (113 dB) signal 4" diameter; universal mount Sold each

$8.95

$24.95

Oil Pressure Switch for 77-85 XL Hydraulic Screw-Type Stoplight Switch
Oil Pressure Switch for 77-85 XLHydraulic Screw-Type Stoplight Switch
Precision-calibrated replacement oil pressure switch features heavy contacts, brass pressure ferrules, thermo-plastic insulators and brightly finished steel shells Designed and tested to ensure consistently accurate pressure thresholds Made in the U.S.A.

For 66-73 Servi-Car, 66-70 FL

$14.95

$10.95

Hydraulic Stoplight Switch for 79-85 XL (Spade-Type) Stoplight Switch for 73-81 XL
Hydraulic Stoplight Switch for 79-85 XL (Spade-Type)Stoplight Switch for 73-81 XL

Spade-type switch features Bakelite insulators, heavy-duty contacts and high-conductivity brass terminals

Replacement stoplight switch for front brake handlebar control

$17.95

$6.95

Stoplight Switch for 67-74 XL (Push) Stoplight Switch for 75-76 XL
Stoplight Switch for 67-74 XL (Push)Stoplight Switch for 75-76 XL
  • Chrome replacement stoplight switches
  • Also work great for custom applications
  • Chrome replacement stoplight switches
  • Also work great for custom applications

$13.95

$13.95

Dimmer Switch w/Wires for 66-71 FL; 54-72 XL Dimmer Switch without wires for 66-69 Shovelhead; 54-72 XL
Dimmer Switch w/Wires for 66-71 FL; 54-72 XLDimmer Switch without wires for 66-69 Shovelhead; 54-72 XL
  • Chromed handlebar dimmer switch with wires
  • Sold individually
  • Chromed handlebar dimmer switch without wires
  • Sold individually

$12.95

$10.95

Replacement Starter/Horn/Turn Signal Switch for 73-81 XL Electrical Terminal Plate Kit for 70-74 XL
Replacement Starter/Horn/Turn Signal Switch for 73-81 XLElectrical Terminal Plate Kit for 70-74 XL
  • Replaces starter, horn or turn signal switch on handlebar controls
  • Sold individually
Quality painted and pre-assembled terminal plate Includes terminal plate; OEM #72303-70, expansion nuts: OEM #70574-68, self-tapping screws; OEM #2809 and mounting hardware Made in the U.S.A.

$6.95

$13.95

Replacement Headlight Socket & Terminal Kit for 75-85 XL Single-Mount Headlight Bracket
Replacement Headlight Socket & Terminal Kit for 75-85 XLSingle-Mount Headlight Bracket
  • OEM-quality replacement
  • Made in the U.S.A.

Chrome single-mount headlight bracket is 3-7/8" long with 1-3/8" mounting slots, centered at 5-5/8" Fits many stock and custom front ends

$3.95

$23.95

Side-Mount Headlight Brackets- Sold in Pairs Visor for 5-3/4" Headlight
Side-Mount Headlight Brackets- Sold in PairsVisor for 5-3/4" Headlight

Chrome clip-on style headlight brackets 51/2" brackets fit tube-type custom front ends without headlight provision, such as custom triple trees and competition forks Use with our side-mount headlight, PART #DS-280036 Sold in pairs

For FX, FXR, FL AND XL MODELS Visor for 5-3/4" Headlight; repl. OEM #67750-88T Sold Each Visors are easy to install; add a custom look Chrome steel construction

$16.95

$10.95

Headlight Visor Covers for 75-85 XL Laydown taillight assembly for 73-85 XL
Headlight Visor Covers for 75-85 XLLaydown taillight assembly for 73-85 XL
Chrome-plated, perfectly formed steel visor cover fits over stock headlight visors Available with cut-away for oil and generator lights

Will bolt directly to the fender on most 73-85 XL models (adapter bracket included) NOTE: Not DOT approved.

$19.95

$51.95

Laydown taillight assembly w/blue dot for 73-85 XL Tail Light for 65 Panhead; 57-72 XL
Laydown taillight assembly w/blue dot for 73-85 XLTail Light for 65 Panhead; 57-72 XL

Will bolt directly to the fender on most 73-85 XL models (adapter bracket included) NOTE: Not DOT approved.

  • Chrome housing with red lens
  • 12V Bulb

$56.95

$32.95

LED Tail Light for most 73-E84 models Rear Turn Signal Studs/Nuts for 79-80 XL
LED Tail Light for most 73-E84 modelsRear Turn Signal Studs/Nuts for 79-80 XL

Shines brighter than standard taillights but draws less current Bolts on directly to most XL models Not DOT approved

  • Chrome rear turn signal studs with nuts are available in standard lengths
  • Made in the U.S.A.

$69.95

$4.95

Rear Turn Signal Bracket for 73-85 XL w/screw Turn Signal Bracket to Lamp Mount for 73-85 XL (4pk)
Rear Turn Signal Bracket for 73-85 XL w/screwTurn Signal Bracket to Lamp Mount for 73-85 XL (4pk)

Chrome finish Direct OEM replacement Sold each Made in the U.S.A.

Chromed mount

$7.95

$7.95

Chrome Rear Turn Signal Relocation Kit for 75-85 XL models Handlebar Turn Signal Clamp for 82-85 XL, any 1" handlebars
Chrome Rear Turn Signal Relocation Kit for 75-85 XL modelsHandlebar Turn Signal Clamp for 82-85 XL, any 1" handlebars
Now it's easy to move your signals back for more saddlebag clearance Moves lights to fender, mounts with two 1/4"-20 studs into OEM license plate bracket Especially useful with oversized bags Each kit includes all wire, brackets, spacers, connectors and hardware required for quick installation
  • Chromed handlebar clamp and screws
  • Sold each

$46.95

$11.95

Hazard Flasher Relay for 66-84 Shovelhead; 65-85 XL Bi-metal 12V, 2 Pin Flasher for 65-85 XL
Hazard Flasher Relay for 66-84 Shovelhead; 65-85 XLBi-metal 12V, 2 Pin Flasher for 65-85 XL

OEM replacement 12V hazard flasher relay

  • Directional and hazard flashers
  • DOT certified

$6.95

$7.95

Solid State 12V Flasher for 65-85 XL
Solid State 12V Flasher for 65-85 XL
  • Directional and hazard flashers
  • DOT certified

$17.95

1 - 91 of 91 items